For a richer surfing experience on our website, please update your browser. Update my browser now!
Our range of Series AM worm gear units are based on a single universal case for each size, giving a high degree of common parts and interchange ability.
Unit Sizes | 1002, 1252, 1602, 2002 |
Input Power | Up to 132 HP (100 kW) |
Output Torque | Up to 68000 lb.in (8500 Nm) |
Gear Ratios | Up to 70/1 in single stage, 4900:1 in double reduction |
Motor Sizes | IEC Frames from 80 to 132; NEMA Frames from 56 to 256 |
Our range of Series AM worm gear units are based on a single universal case for each size, giving a high degree of common parts and interchange ability.
Under-driven, over-driven and vertical types provide a choice of shaft arrangements in meeting the requirements of a wide variety of applications in the medium power range up to 75 kW.
All units are designed with hollow bore output, while a plug in output shaft can be fitted allowing the installed side of the shaft to be changed without dismantling the unit. Series A Mid Range gives a choice of 12 standard ratios from 5/1 to 70/1 and important features include high efficiencies and load carrying capacities combined with long life and reliability in service.
Double Reduction Units (worm/worm)
These units consist of a standard single reduction unit with a smaller shaft mounted unit fitted to the input shaft. The three smallest sizes are fitted with shaft mounted Series A Junior units whilst the size 2002 is fitted with a size 1002 (C07 when motorised). The range extends the ratios available up to the maximum of 4200/1 making them ideal for fitting to slow moving machinery.
As with the single reduction units they are available in under-driven, overdriven and vertical types, foot mounting and shaft mounting.
Heavy Duty Mixer Units
Based on the standard Series A Mid Range the Heavy Duty Mixer Unit incorporates an extended bearing housing to accommodate a larger bottom bearing and increased shaft size, thereby enhancing the units capacity to absorb the high bending loads imposed during mixer applications.
These units can be ordered with a dry-well option to minimise the risk of output shaft leakage.
Features | Benefits |
---|---|
Accepts standard IEC/NEMA motors | Non dedicated industry standard motors readily available. Free motor brand choice |
Cast Iron Case | Robust Design, minimal service . Increased plant availability |
High torque capacity | Allows downsizing. Reduced costs |
Modular construction (A Mid) | Quick build/availability. Increased plant availability |
Atex compliant | Can be supplied against Group 2 or 3 for surface industries in designated hazardous locations, Zones 1 and 2 for gases, vapours and mists and Zones 21 and 22 for dust. |